KRK Rokit 8 Generation 5 8" Studio Monitor (Each)

Elevate your audio production to new heights with KRK Systems’ Rokit Generation Five product line that caters to the diverse needs of musicians, producers, and sound engineers worldwide. Whether you’re working on a chart-topping hit, a film score, or a personal project, KRK Systems Rokit Generation Five monitors provide the tools you need to capture every nuance of your sound with astonishing clarity. Rokit Generation Five has three very useful voicing modes. Mix Mode, with flat frequency and phase response, is best for mixing, mastering, and critical listening. Create Mode is a more inspirational voicing best used for writing, producing, and casual listening. Focus Mode is a mid-focused voicing for critical analysis of the midrange band where vocals and most instruments have the most energy. They feature 25 boundary and tuning EQ combinations that help minimize and correct problems in your acoustic environment and woven Kevlar® aramid fiber cone woofers for superior damping and modal breakup control. The tweeters benefit from a highly damped acoustic silk dome diaphragm to smoothly extend the frequency range up to 40 kHz. For maximum transient response and dynamics reproduction, bi-amplified Class D power amplifiers drive the transducers evenly and more efficiently at reduced operating temperatures to ensure audio integrity during long work sessions.

FEATURES

• Advanced Class D Amplification & DSP Tuning: Ensures efficient power usage and enhances audio performance.

• Woven Kevlar Aramid Fiber Woofer: Delivers tight, accurate low and low-mid performance.

• New Silk Dome Tweeter Design: Improves high-mid and high-frequency response for pristine sound quality.

• Three Voicing Modes: Tailored for creating, mixing, and critical listening.

• Customisable EQ Settings: Adapts to any studio environment for optimal sound.

• Magnetic Faceplates: Offers a choice of look and level of protection.

• Acoustic Foam Wedge Isolation Pads: Included for proper monitor setup and positioning.

SPECIFICATIONS

Configuration: 2-Way Bass Reflex
System Type: Active Studio Monitor
Low-Frequency Driver: Woofer, 8-inch, woven Kevlar® aramid fiber cone, ferrite magnet
High-Frequency Driver: Tweeter, 1-inch, Silk Dome, Copper Cap, ferrite magnet
Frequency Response (+/- 3 dB): 42 Hz – 36 kHz
Frequency Range (+3/-10 dB): 32 Hz – 40 kHz
Crossover Frequency: 1.64 kHz
Amplifier Configuration: Bi-amplified (Class D)
HF Amp Power Output*: 68 Watts
LF Amp Power Output*: 135 Watts
Total Power*: 203 Watts
Total Dynamic Power Output**: 312 Watts
Max SPL***: 111 dB
Coverage Angles****: 148° Horizontal x 125° Vertical
Analog Input Connector: Balanced XLR / 1/4”TRS Combo
Input Impedance: 5.12kΩ Balanced
SNR (Signal to Noise Ratio): >94 dB (Low Sensitivity setting, balanced), >91 dB (High Sensitivity, unbalanced)
AC Input Voltage: 100 – 240VAC (+/- 10%), 50/60 Hz
Fuse Type: 5x20 mm T2A 250V
Enclosure Construction: PVC Vinyl Wrapped MDF
Baffle Construction: Structurally Reinforced High Impact Polystyrene
Product Dimensions (H x W x D): 15.75” (400 mm) x 10.47” (266 mm) x 12.56” (319 mm)
Packaged Dimensions (H x W x D): 20.47” (520 mm) x 13.78” (350 mm) x 15.35” (390 mm)
Product Weight: 23.04 lbs. (10.45 Kg.)
Packaged Weight: 28.66 lbs. (13 Kg.)
Optional Accessories: KRKSTDX68W1 Mounting Bracket and KRKSTDX4A1 35 mm Mounting Adapter

* Rated Amplifier Power Output is measured at 1% THD+N
** Rated Dynamic Power Output is measured as instantaneous peak power at 10% THD+N
*** Max SPL is calculated as a function of the driver sensitivity (1W @ 1M) and the Dynamic Power rating *** Coverage Angles are averaged -6 dB down points from 900 Hz to 9 kHz